Postal Funds Download

optimail_30

Optimail

Centor3

Centormail

1) Insert meter phone cord into fax telephone line (or the phone line you normally use to load your meter).
2) make sure your Master Card is correctly inserted, with chip facing away from you.
3) Clear any error message from the meter display by following instruction message on meter display.
4) Press the “money” key (5/20/50 coins) on top left side of key pad.
5) Press the Teleset key on the top right.
6) The previous load amount will be displayed.

  • To load this amount again, simply press LOAD to continue.
  • To load a different amount, press the CHANGE key, then enter the amount desired, then press LOAD. Display shows “Do you really want to load this amount?” Confirm with the LOAD key.

7) Display shows “processing”.
8) Procedure will complete in about two minutes with a message successfully completed.
9) Press CONTINUE to return to the home screen. Meter is ready to use.

Mymail

mymail

1) Insert meter phone cord into fax telephone line (or the phone line you normally use to load your meter).
2) Scroll to MENU and confirm with E key. 3) Scroll to GET POSTAGE and confirm with E key. 4) Enter the amount desired and press E key and confirm message “Download $ now?” with E key. 5) Your Mymail connects to remote server. 6) At completion, confirm postage received message with C key. Meter is ready to use.

Ultimail

ultimail silver

1) Insert meter phone cord into fax telephone line (or the line that you normally use to load your meter).
2) make sure your master card is inserted, and press the Teleset key.
3) Select RUN TELESET.
4) The previous load amount is displayed, to load this amount again, press continue or key the amount desired.
5) Confirm the message “Are you sure you want to perform Teleset?” by selecting yes. 6) Your Ultimail connects to remote server.
7) At completion, press CONTINUE to return to the home screen. Meter is ready to use.

postbase

Postbase

postbase-one

Postbase One

postbase-mini

Postbase Mini

1) With Ethernet cable already connected, turn on Postbase. (Note: if Ethernet cable has been unplugged from your Postbase, your Postbase must be rebooted with the Ethernet cable connected or no connection will be possible).
2) From the home screen, select MENU.
3) Select DOWNLOAD POSTAGE,
4) enter the amount you wish to download.
5) confirm prompt “Do you want to load this amount?”
6) the Postbase will complete the procedure in a few minutes and is ready for use.

Get a Free Quote
*Name:
Please leave this field empty.
*Email:
*Phone:
Additional Comments:
  • Contact FP