Optimail 30 and Centormail

To perform a $0 loading, proceed as follows: 
1) Insert meter phone cord into fax telephone line (or the phone line you normally use to load your meter). 
2) Be sure your Master Card is correctly inserted, with chip facing away from you. 
3) Clear any error message from the meter display by following instruction message on meter display. 
4) Press the “money” key (5/20/50 coins) on top left side of key pad. 
5) Press the Teleset key on the top right. 
6) The previous load amount will be displayed. 
If the previous load amount displayed is $0, simply press LOAD to continue. 
If the previous load amount is not $0, press the CHANGE key, then enter 0 amount, then press LOAD. Display shows “Do you really want to load this amount?” Confirm with the LOAD key. 
7) Display shows “processing”. 
8) Procedure will complete in about two minutes with a message successfully completed. 
9) Press CONTINUE to return to the home screen. Meter is ready to use.  

Mymail

To perform a $0 loading, proceed as follows: 
1) Insert meter phone cord into fax telephone line (or the phone line you normally use to load your meter). 
2) Scroll to MENU and confirm with E key.
3) Scroll to Get Postage and confirm with E key.
4) Enter the amount 0 and press E key and confirm message “Download $0 now?” with E key.
5) Your Mymail automatically connects.
6) At completion, confirm postage received message with C key. Meter is ready to use.

Ultimail  

To perform a $0 loading, proceed as follows:  
1)  Insert meter phone cord into fax telephone line (or the line that you normally use to load your 
     meter).
2)  Make sure your master card is inserted, and press the Teleset key.
3)  Select Run Teleset.
4)  If the load amount shown is not zero, change it to zero by pressing zero key, then press 
     continue.
5)  Confirm the message “are you sure you want to perform Teleset?” by selecting yes.
6)  At completion, press Continue to return to the home screen. Meter is ready to use.